Power Source And Wire Feeder Maintenance - ESAB EMP 215ic Betriebsanweisung

7 MAINTENANCE
Interval
Every 3 month
Clean or replace
unreadable labels.
Every 6 month
Clean inside
7.2

Power source and wire feeder maintenance

Perform a power source cleaning each time you replace a Ø100 mm (4") or Ø200 mm (8")
wire bobbin.
0463 408 001
Clean weld
terminals.
equipment.
Area to maintain
Check or replace weld cables.
- 28 - © ESAB AB 2016