Product Introduction - Grundfos PS.G Serie Montage- Und Betriebsanleitung

9. Product introduction

Grundfos pumping stations are prefabricated pumping stations for
collection and pumping of wastewater. The pumping stations
come as completely assembled units ready for installation. The
pumps are lowered into the pit when the pit has been installed.
The pump pit is made of glass-fibre-reinforced plastic (GRP) and
comes with inlet and outlet pipes fitted.
The pit is available with a separate valve chamber enabling the
operator to get access to valves without having to enter the pump
pit.
Wastewater is led into the pit. When the liquid in the pit reaches
the maximum liquid level, the pump will start and pump the liquid
further on into the sewer system.
1
3
7
8
15
16
Fig. 23 Example of pumping station
Pos. Component
Cover
1
Cover approved for
traffic
2 Hatch
3 Venting pipe
4 Handrail
5 Safety grid
6 Ladder
7 Outlet
8 Pipes
9 Service platform
10 Inlet
Screen basket
11
Baffle plate
12 Lifting chain
13 Pump
14 Auto coupling
15 Level switch
16 Pit bottom
12
2
4
5
6
9
10
11
12
13
14
Material
Glass-fibre-reinforced
plastic (GRP)
Concrete ring and cast-
iron hatch
Aluminium
Stainless steel
Stainless steel
Galvanised steel
Aluminium
Stainless steel
Stainless steel
Polyethylene
Aluminium
Stainless steel
Polyethylene
Stainless steel
Stainless steel
Stainless steel
Galvanised steel
-
Epoxy-coated cast iron
-
Glass-fibre-reinforced
plastic (GRP)
3
2
6
4
5
9
8
Fig. 24 Valve chamber
Pos. Component
1 Valve chamber
2 Cover
3 Hatch
4 Isolating valve
5 Non-return valve
6 Ladders
7 Pipes
8 Drainage pipe
9 Drainage valve
7
1
Material
Glass-fibre-reinforced
plastic
Glass-fibre-reinforced
plastic
Aluminium
Epoxy-coated cast iron
Epoxy-coated cast iron
Aluminium
Stainless steel
Stainless steel
Plastic