Before First Use; Accessories; Operation; Checking The Battery Pack Charging Level - Parkside PWSAP 20-Li B2 Bedienungs- Und Sicherheitshinweise Originalbetriebsanleitung

˜ Before first use
˜ Accessories
To operate this product safely and correctly, the
following accessories, i .e . tools and accessory
tools, are necessary:
Grinding wheel
¾
Abrasive cutting wheel
¾
Guard for cutting
¾
Cross tip screwdriver
¾
Wire brush
¾
Accessories and accessory tools are available
through your authorised dealer . When buying
always consider the technical requirements of this
product (see "Technical data") .
If you are not certain, ask a qualified specialist
and get advice from your trusted dealer .
NOTE
This instruction manual contains
u
information and suggestions for several
accessory tools and their uses . The
accessory tools depicted are not included
in the shipment (see "Scope of delivery"),
but are meant to indicate additional
possibilities for using this product .
m
WARNING!
Do not use accessories not recommended
u
by Parkside . This may result in electric
shock or fire .
Suitable battery packs and chargers
Battery
Parkside 20 V battery pack
pack:
PAP 20 A1, PAP 20 A2, PAP 20 A3
Charger: Parkside 20 V charger PLG 20 A1,
PLG 20 A2, PLG 20 B1, PLG 20 A3
44 GB/IE
˜ Operation
˜ Attaching/removing the
battery pack
Removing the battery pack: Press the
¾
battery pack release button 15 . Remove the
battery pack 5 (Fig . D) .
Attaching the battery pack: Align the
¾
battery pack 5 to the handle and slide it
into it . Ensure it clicks noticeably in place .
The battery pack can only be inserted into
the product in one direction .
˜ Checking the battery pack
charging level
(Fig . B)
Check battery pack charge level: Press the
¾
16 button . The charging level LEDs 17
light up:
LED 17
Red / orange / green
Red / orange
Red
˜ Charging the battery pack
(Fig . C)
NOTE
The battery pack 5 may be charged at
u
any time without reducing the life .
Interrupting the charging process does not
u
damage the battery pack 5 .
Charge the battery pack 5 before
¾
operation when it is at medium or low
charging level .
Charging level
Maximum
Medium
Low