Original Accessories / Tools; Before Use; Selecting The Grinding Disc; Changing Sanding Sheets - Parkside XQ270 Bedienungs- Und Sicherheitshinweise

General safety advice for electrical power tools / Before use
J
avoid contact with the moving sand-
ing sheet.
J
Use the appliance only with a sanding
sheet in place.
J
Never use the appliance for purposes
other than those intended and only
with original components / accessories.
J
Introduce the appliance to the work
piece with it switched on. On task com-
pletion, lift the appliance from the work piece
and then switch it off.
J
Permit the switched off appliance to
come to a complete standstill before
putting it down.
J
The appliance must always be kept
clean, dry and free of oil or grease.
J
Keep your workplace clean. Material
mixtures are particularly dangerous. Light met-
al dust can burn or explode.
J
Do not use the electric tool with a
damaged lead. Do not touch the damaged
lead and remove the mains plug if the lead be-
comes damaged while you are work-ing with
the device. Damaged leads increase the risk of
an electric shock.

Original accessories / tools

Q
J
Use only the accessories detailed in the operat-
ing instructions. The use of inserted tools or ac-
cessories other than those recommended in the
operating instructions could lead to you suffer-
ing an injury.

Before use

Q

Selecting the Grinding Disc

Q
Metal Removal and Surface:
The rate of metal removal and the surface quality
are determined by the grain size of the grinding disc.
j
lease note that corresponding grinding discs
with different grain sizes should be used for
processing different materials.
10 GB/IE/CY
All manuals and user guides at all-guides.com

Changing sanding sheets

Q
WaRNING! RISK OF INjURy! Before
carrying out work on the appliance, always re-
move the plug from the power socket.
The rotary sander is fitted with a velcro rapid attach-
ment, making possible a quick and easy exchange
of sanding sheets.
j
Lift the grinding disc
from the backing pad
NOTE: Before securing a new sanding sheet
remove all dust and dirt from the sander plate
j
Ensure that the openings in the sanding sheet
concur with the boreholes of the sanding plate

Dust / Swarf Removal by Suction

Q
J
Please note the "Safety Instructions" Section.
Removal by Suction with Dust Collector:
j
Push the dust collector
device.
j
In order to empty the dust collector
off the device.
NOTE: Empty the dust collector
time and regularly in order to ensure the opti-
mum removal of dust by suction.
External Exhaust Suction (see Illustration a):
Connection:
j
Push the adapter for external exhaust suction
on to the exhaust nozzle
wise to fix it in place. If necessary, use the re-
ducing piece by pushing it into the adapter
8
for external exhaust suction
j
Push the hose of an approved suction device
(e.g. a workshop vacuum cleaner) on to the
adapter for external exhaust suction
the reducing piece if necessary
Removal:
j
Pull the hose of the suction device off the
adapter for external exhaust suc-tion
j
Turn the adapter for external exhaust suction
in an anticlockwise direction and pull it off with
the reducing piece
8
at the side and pull it off
5
in order to remove it.
4
5
4
5
4
completely onto the
3
pull it
3
in good
3
7
and turn it clock-
6
.
7
, using
7
.
8
.
7
7
if necessary.
,
.
.