Waste Disposal And Environmental Protection; Technical Data - FLORABEST FHL 900 A1 Originalbetriebsanleitung

In case of complaint or for servicing,
please send your equipment cleaned and
with an indication of the defect, to our
service address.
Equipment sent in with freight collect
– by bulk freight, express or with other
special freight – are not accepted.
We can dispose of your equipment free of
charge.
Waste Disposal
and Environmental
Protection
Be environmentally friendly. Return the
tool, accessories and packaging to a recy-
cling centre when you have finished with
them.
Electrical machines do not belong
in domestic waste.
Take the equipment to a waste disposal
site. The plastic and metal parts that are
used can be separated out into pure grade,
which allows recycling. Ask our Service
Centre for details (see p.105 for address).

Technical Data

Electrical Hedge Trimmer....FHL 900 A1
Input voltage rating ......230-240V~, 50 Hz
Input power .....................................900 W
Safety class .......................................
Degree of protection
Weight .......................................... 6,22 kg
Cutting length .............................. 410 mm
Cutting capacity ............................. 20 mm
Acoustic pressure level (LpA)
................... 89,2 dB(A); KpA = 1,11 dB(A)
Measured sound power level (LwA)
................. 95,63 dB(A); KwA = 1,11 dB(A)
Guaranteed sound power level
..................................................97,0 dB(A)
Vibration at the handle
........................... 7,096 m/s
Vibration at the round handle
........................... 5,862 m/s
Noise and vibration values have been de-
termined according to the standards and
regulations mentioned in the declaration
of conformity.
Technical and optical changes may be
undertaken in the course of further de-
velopment without notice. All dimensions,
references and information in this instruc-
tion manual are therefore not guaranteed.
Legal claims made on the basis of the
instruction manual can therefore not be
considered as valid.
The stated vibration emission value was
measured in accordance with a standard
testing procedure and may be used to
compare one power tool to another.
The stated vibration emission value may
also be used for a preliminary exposure
assessment.
GB
.........................IP 20
; K = 1,5 m/s
2
; K = 1,5 m/s
2
15
II
2
2