Program Settings; Version Info; Selecting A Program; Configuration - Bosch FWA 6620 Originalbetriebsanleitung

5.10

Program settings

1. Call up main menu.
Abb. 58: Main menu
2. Select :
 Dialog box "Program setting" is opened.
5.10.1

Selecting a program

Abb. 59: Program settings
Icon Function
Display software version.
Wheel alignment settings.
Calibration / maintenance:
Calibration of the measurement boards, the ca-
mera beam and the measurement bay.
i
The password is "admin".
Managing user data:
Management of customer data and up-
date of vehicle database.
i
The password is "admin".
!
The database update function is only to be opera-
ted by qualified personnel. Inexpert usage could
damage the current database
Enter workshop address.
Tab. 11: Table Program settings
Robert Bosch GmbH
Operation | FWA 6620 / 6720 / 6820 | 55
5.10.2
¶
Select
 Dialog box "Version Info" is opened.
 Extended version information is displayed.
Abb. 60: Version Info
5.10.3
¶
Select
 Dialog box "Configuration" is opened.
 Configurations can be performed.
Abb. 61: Configuration
Function
Language selection
Demo mode
Castor measurement Castor measurement on 10
Measurement mode
Unit of measurement Choose 1/60 degree or 1/100degree.
Rim diameter
Toe alignment
Display accuracy
.
Spatial dynamics
Tab. 12:

Version Info

:

Configuration

:
Setting
Select a language.
R On/off to work without camera.
R Ctrl + ← or Ctrl + → to manage the
progress of the wheel alignment con-
trol in the steering angle routine of
the castor.
wheel angle calculation basis.
Four-wheel measurement or two-wheel
measurement
Select mm or inches.
Choose degree, mm or inch.
Select 0.01, 0.05 or 0.1 to round measu-
rement results.
Configuration table
1 690 706 113
en
° or 20 °
|
2017-10-11