R750EU6 - TE4 - IE4 - ISE4
ENGINE OIL LEVEL CONTROL
Follow the procedure below.
Filler Cap (M)
1- Start the engine and bring it to the ope-
Oil Dipstick (L)
GB
rating temperature (70÷80 °C).
2- Turn off the engine and remove the
ignition key.
3- Place the engine on a perfectly level
surface.
4-Wait a few minutes so that all the oil will
flow into the sump.
5-Remove the dipstick (L) and check the
oil level.
6- Top up, if necessary, from plug (M). As
for the oil quantity, see "Technical data ".
The oil level should be included
between the minimum and maximum
marks. Do not mix oils of different
brands or with different features. (See
"Recommended lubricants")
English
60
2056G