Handling And Lifting - VM R750EU6 - TE4 Bedienungsanleitung

R750EU6 - TE4 - IE4 - ISE4

HANDLING AND LIFTING

Secure the engine with a lifting device
(lifting beam) of appropriate capacity.
GB
0°
The angle formed by the lifting device
chains must not exceed 5°, as shown
in the figure.
–Hook the lifting device to the fixing points
as shown in the figure.
–Before carrying out the lifting, identify the
barycentre position of the load.
The brackets of the fixing points have
been designed to lift the engine only
Max 5°
without any additional weight. Do not
lift the engine using a different proce-
dure from the prescribed one; othe-
rwise, the warranty for damages will be
invalidated.
English 35 2056G