Scope Of Delivery; Instructions For Use; Preparation For Use - Ottobock 2R10 Gebrauchsanweisung

Signs of changes in or loss of functionality during use
Among other factors, changes in functionality can be indicated by an altered
gait pattern, a change in the positioning of the prosthetic components relat­
ive to each other and by the development of noises.

4 Scope of delivery

Quantity
1
1
Spare parts/accessories (not included in the scope of delivery)
Designation
Dorsal stop set
Consisting of: 2 dorsal stops (hard, soft)
Single component pack for single axis feet
Consisting of: 1 lower joint shell, 1 shell, 1 base plate, 3 rub­
ber bumpers (soft, medium, hard), 2 hexagon nuts

5 Preparation for use

CAUTION
Incorrect alignment or assembly
Risk of injury due to damaged prosthetic components
► Observe the alignment and assembly instructions.
CAUTION
Improper assembly of the screw connections
Risk of injury due to breakage or loosening of the screw connections
► Clean the threads before every installation.
► Apply the specified torque values.
► Follow the instructions regarding the length of the screws and about
how to secure the screws.
5.1 Mounting the adapter
Required materials: 710D4 torque wrench, for 2R51 with 1H*: 2S88
>
dorsal stop set
1) When using the 2R51 with the 1H*: Position the chosen dorsal stop in
the prosthetic foot (see fig. 2).
2) Set wide end of the chosen rubber bumper (see fig. 1, item 1) into the
recess in the prosthetic foot.
Designation

Instructions for use

Foot adapter
Reference number
–
–
Reference number
2S88*
2D5
11