Water Supply; Preparatory Work - Salvis Marmite 800 Plus Installations- Und Gebrauchsanweisung

en
2.4

Water supply

The water filling process must be supervised!
Rotary switch for
power levels and
modes
Drain
tap
28
Water supply
(add-on equipment)
Level mark
Rotary switch for
mains on and
temperature
setting
Rotary switch for water
supply (add-on
equipment)

Preparatory work

. Open the hinged top cover.
. Close the drain tap.
. Open the water tap provided on-site.
Allow water to run in
. Set rotary switch for "Mains on and tem-
perature setting" to the lowest tempera-
ture.
D The green indicator lamp lights up.
. Turn rotary switch for "Water supply" by a
click stop to the left or right.
D Water runs in.
. When the desired quantity of water has run
in or the highest fill level (level mark "−6")
has been reached, turn back the "Water
supply" rotary switch by one click stop to
zero.
Setting the temperature and the power
level
. Set the desired temperature using the rotary
switch for "Mains on and temperature set-
ting".
. Set the desired power and mode using the
rotary switch for "Power levels and
modes".
D The yellow indicator lamp lights up while the
appliance heats up.