Introduction; Proper Use; Description Of Parts And Features - Parkside PLP 100 A1 Bedienungs- Und Sicherheitshinweise

Do not drink!
Dispose packaging and appliance in an
environmentally-friendly way!
Soldering gun PLP 100 A1
©

Introduction

Please make sure you familiarise yourself fully with the way
the device works before you use it for the first time and that
you understand how to handle it correctly. Please read the
operating instructions below. Be careful to keep these advice notes and
if necessary pass them on to a third party.
©

Proper use

The device is intended for soldering tasks in a DIY environment. Soft solder-
ing takes place at temperatures below 450 °C. Suitable solders have typical
melting temperatures around 200 °C. Use the device only as described
and for the indicated purposes. The device is not intended for commercial
use. Any other use or modification to the device shall be considered as
improper use and could give rise to considerable dangers. The manufac-
turer will not accept liability for loss or damage arising from improper use.
©

Description of parts and features

Soldering tip
1
Union nut
2
Introduction
GB 7