MARIMEX Comfort Aufbauanleitung Seite 59

EN
Step 13
Connect each upper safety
pole and lower safety pole
together by the pin and
make sure the pin is locked.
Step 14
Cover the entire pole with
sleeve.
Step 15
Insert the curved enclosure
poles into the two welded
tubes of the leg tube one by
one, as shown in the picture.
Tighten the safety poles
with attached screws at
the bottom welded tubes.
(Please use the hexagon L
Spanner.)
Step 16
Insert fiberglass poles into
the top pathway of safety
net one by one. Join the
ends of two fiberglass
poles together by silver
connector. (If there is a
shorter pole, then assemble
it at last.)
59