Klarstein Gaia Handbuch Seite 13

OPERATION
1. Power on
Plug the appliance with power supply,
be in standby after 1S
2. Procedure setting and heating
Press Time key once, the time will be 1 hour more. Press Time for more than 1 S,
time figure will increase by hours continuously and stop after no pressing. The time
setting circle is 0-15 hours.
3. Start preparation process
After time setting, press Start/Stop key to start heating and count down figure will
show in LCD display.
For example: Time setting for 5 hours,
winking; when count down figure is less then 1 hour,
"Min" keeps winking.
4. End preparation process
(A) Stop heating automatically: When count down is over, appliance stops heating
automatically then in standby. Meanwhile,
(B) Stop heating manually: When appliance is in heating situation, press Start/
Stop key and appliance is in standby directly. Meanwhile,
will show in LCD display and it will
.
shows in LCD and "Hr" keeps
shows in LCD.
shows in LCD and
shows in LCD.
EN
13