Connecting To A Compressed-Air Source - Parkside PDKS 6.3 B3 Originalbetriebsanleitung

The following options are available:
♦ Attach a maintenance unit with an oiler to the compressor .
♦ Install a fitted oiler into the compressed-air line or the compressor .
♦ Add 3–5 drops of pneumatic oil into the connector nipple
every 15 minutes of operation .

Connecting to a compressed-air source

NOTE
► Before connecting the compressed-air source
–
the correct working pressure (3–6 .3 bar) must be fully
reached, and
–
you must ensure that the trigger is in its initial position .
♦ Attach the tool to a compressor by connecting the connector
nipple with the supply hose of the compressed-air source .
♦ The compressed-air source must be equipped with a pressure
reducer so that you can regulate the air pressure .
PDKS 6.3 B3 GB │ MT │ 69 ■