17
Technical Information
Heater Band Installation
Heater Band Installation
Figure 33
The heater band model 969-9804 and 969-9803 can be used to heat
the pump casing when a bakeout is needed.
The heater band is applied to the upper part of the pump casing, as
shown in the figure, and heats it to a temperature of about 80 °C.
The heater band must be mounted such that there is perfect thermal
contact with the pump wall to obtain fast and efficient heating.
Figure 34
254/282
TV 301 Navigator User Manual / 87-900-946-01
(M)