Adjusting the Picture
While watching the picture, you can adjust contrast,
brightness, chroma, and phase to suit your taste. The
adjustments can be carried out for each input signal
separately. You can also store the adjusted levels in
memory.
Adjusting the Contrast,
Brightness, Phase, and Chroma
Press MENU so that the main menu appears on the
monitor screen and select the "CONTRAST",
"BRIGHTNESS", "CHROMA", or "PHASE" from the
CONFIG menu with the SELECT+/– buttons.
CONTRAST
Select the "CONTRAST" with the SELECT+/–
buttons and press the ENTER button.
Adjust the contrast with the SELECT+/– buttons in the
range from MIN (0) to MAX (+100).
+: to increase picture contrast
–: to decrease picture contrast
BRIGHTNESS
Select the "BRIGHTNESS" with the SELECT+/–
buttons and press the ENTER button.
Adjust the brightness with the SELECT+/– buttons in
the range from MIN (–50) to MAX (+50).
+: to make overall picture greenish
–: to make overall picture purplish
CHROMA
Select the "CHROMA" with the SELECT+/– buttons
and press the ENTER button.
Adjust the chroma with the SELECT+/– buttons in the
range from MIN (–50) to MAX (+50).
+: to increase color intensity
–: to decrease color intensity
PHASE
Select the "PHASE" with the SELECT+/– buttons and
press the ENTER button.
Adjust the phase with the SELECT+/– buttons in the
range from MIN (–50) to MAX (+50).
+: to make overall picture greenish
–: to make overall picture purplish
16
16
(EN)
Notes
• CHROMA and PHASE controls do not function with
RGB signal.
• PHASE control does not function with component
signal.
• PHASE control does not function with PAL color
source.
• Do not change the CHROMA/PHASE (NTSC only)
level when the selected signal is not NTSC or PAL.
Although it gives no effect to the current picture, it
does affect the picture of the NTSC or PAL signal
which is input later.
Restoring the Contrast,
Brightness, Phase, and Chroma
to Original Settings
1
From the PIC CONTROL menu, Press SELECT+
or – to move the cursor (z) to "RESET" and press
ENTER.
The following menu appears on the monitor
screen.
R E S E T :
N O
+
–
S E L E C T
C A N C E L
ENTER
2
Press SELECT+ or –.
"NO" changes to "YES."
R E S E T :
Y E S
+
–
S E L E C T
C A N C E L
ENTER
3
Press ENTER.
The contrast, brightness, chroma, and phase
settings are restored.
To cancel the reset function, press the MENU button
before pressing the ENTER button.
SONY BKM201SC (E,F,G,S,I) 3-859-609-02
MENU
MENU