Sony BKM-201SC Bedienungsanleitung Seite 6

Location and Function of Parts and Controls
4 LINE IN connectors
VIDEO IN (BNC-type): Connect to the composite
video signal output of the video equipment.
Y/C IN (Mini DIN 4-pin): Connect to the Y/C signal
output of the video equipment.
AUDIO IN (L/R) (phono type): Connect to the
audio output of the video equipment. Connect to
the channel L when the audio signal is monaural.
5 RGB1 OUT connectors
These connectors are used as loop-through outputs of
the RGB1 IN connectors 2.
R (R-Y)/G (Y)/B (B-Y) IN (BNC-type): Loop-
through outputs of the R (R-Y)/G (Y)/B (B-Y) IN
connectors. Connect to the R (R-Y)/G (Y)/B (B-
Y) signal inputs of another monitor.
HD/COMP OUT (BNC-type): Loop-through output
of the HD/COMP IN connector. Connect to the H
sync signal or composite sync signal input of
another monitor.
VD OUT (BNC-type): Loop-through output of the
VD IN connector. Connect to the V sync signal
input of another monitor.
Note
HD/COMP OUT and VD OUT are high impedance
outputs.
When using these outputs, it is recommend to
connect a monitor with high impedance sync input
connector, or the picture might disappear because of
the sync signal level mismatch.
AUDIO OUT (L/R) (phono type): Loop-through
outputs of the AUDIO IN jacks. Connect to the
audio inputs of another monitor.
6 LINE OUT connectors
These connectors are used as loop-through outputs of
the LINE IN connectors 4.
VIDEO OUT (BNC-type): Connect to the
composite video signal input of another monitor
or video equipment.
Y/C OUT (Mini DIN 4-pin): Connect to the Y/C
signal input of another monitor or video
equipment.
AUDIO OUT (L/R) (phono type): Loop-through
inputs of the AUDIO IN jacks. Connect to the
audio inputs of another monitor or video
equipment.
6 6
(EN)
SONY BKM201SC (E,F,G,S,I) 3-859-609-02