Using The Test Pattern - Sony BKM-201SC Bedienungsanleitung

Using the Memory
3
Press SELECT+ or – to move the cursor (z) to
"MEM LOAD" and press ENTER.
The following menu appears on the monitor
screen.
M E M L O A D
M E M 1 : R G B 3 1 . 5 k 6 0 H z
M E M 2 : E M P T Y
M E M 3 : E M P T Y
M E M 4 : E M P T Y
M E M 5 : E M P T Y
+ –
S E L E C T C A N C E L
ENTER
4
Press SELECT+ or – to move the cursor (z) to
MEM 1 to 5 and press ENTER.
"COMPLETED" message appears for about five
seconds.
The picture is adjusted to the selected condition.
Notes
• You cannot recall the memory data if the selected
signal is different from the preset signal.
• The following items can be memorized:
PIC CONTROL menu
– CONTRAST
– BRIGHTNESS
– CHROMA
– PHASE
PIC SIZE menu
– ZOOM
– H WIDTH
– V HEIGHT
– H SHIFT
– V SHIFT
20 20
(EN)
MENU

Using the Test Pattern

You can use the built-in test signal patterns to check
the monitor.
1
Press MENU.
The main menu appears on the monitor screen.
M A I N M E N U
P I C C O N T R O L
P I C S I Z E
P I C M E MO R Y
C O N F I G
R E MO T E
R A S T E R A D J
T E S T S I G N A L
+ –
S E L E C T C A N C E L
ENTER
2
Press SELECT+ or – to move the cursor (z) to
"TEST SIGNAL" and press ENTER.
The TEST SIGNAL menu appears on the monitor
screen.
T E S T S I G N A L
H A T C H
B O X
C O L O R B A R
G R A Y S C A L E
O F F
+ –
S E L E C T C A N C E L
ENTER
3
Press SELECT+ or – to move the cursor (z) to the
desired test signal pattern and press ENTER.
The selected test signal appears on the monitor
screen.
For details on each test signal pattern, see page
11(EN).
To restore the normal screen
Select OFF at the step 3 above.
SONY BKM201SC (E,F,G,S,I) 3-859-609-02
MENU
MENU