Watching The Picture; Switching The Picture; Watching A Still Picture - Sony BKM-201SC Bedienungsanleitung

Watching the Picture

Before you start
• Turn on the monitor.
• Turn on the connected equipment and play a video
source.
• To display the information on the input signal on the
screen when turning on the power or switching the
input signal, set "STATUS" in the CONFIG menu to
ON. For details, see page 14(EN).
• To set the on-screen language to yours, see page
21(EN).

Switching the Picture

1
Press CONTROL on the front panel of the
monitor.
RGB1, RGB2, YUV, LINE, and Y/C buttons light
up.
2
Select the input source to be displayed by pressing
the following buttons.
RGB1: Selects the audio and video signal input
from the RGB1 connectors. (If the input
signal is component signal, press YUV
also.)
RGB2: Selects the audio and video signal input
from the RGB2 connectors.
YUV: Selects the audio and video signal input
from the RGB1 connectors when the input
signal is component signal.
LINE: Selects the audio and video signal input
from the VIDEO connector in the LINE
connectors.
Y/C: Selects the audio and video signal input
from the Y/C connector in the LINE
connectors.
Color system or horizontal/vertical frequency
P A L
Signal
L I N E · Y / C
type
The selected input signal appears on the monitor
screen.
You can also switch the input signal from the Remote
Commander.
For details, see "Using the Remote Commander" on page
22(EN).
12 12
(EN)
Notes
• The active input signal is converted to VGA format
and output from the ACTIVE OUT connectors.
• We recommend the input source video equipment
equipped with the TBC (time base corrector). If you
receive the signal without the TBC, the picture may
disappear due to disturbance of the sync signal.

Watching a Still Picture

When you operate from the monitor, you can assign
the still function to the SELECT + button.
When you operate from the Remote Commander,
simply press the STILL button.
For details on operating from the Remote Commander, see
"Using the Remote Commander" on page 22(EN).
1
Press MENU.
The main menu appears on the monitor screen.
M A I N M E N U
P I C C O N T R O L
P I C S I Z E
P I C M E MO R Y
C O N F I G
R E MO T E
R A S T E R A D J
T E S T S I G N A L
+ –
S E L E C T C A N C E L
ENTER
2
Press SELECT+ or – to move the cursor (z) to
"CONFIG" and press ENTER.
The CONFIG menu appears on the monitor screen.
C O N F I G
L I N E D O U B L E R : O F F
V E N H A N C E : O N
H F I L T E R : A U T O
S Y N C O N G : O F F
S T A T U S : O N
+
K E Y S T I L L : O F F
L A N G U A G E
3
Press SELECT+ or – to move the cursor (z) to
"+KEY/STILL" and press ENTER.
The following menu appears on the monitor
screen.
+ K E Y S T I L L : O F F
SONY BKM201SC (E,F,G,S,I) 3-859-609-02
MENU