Using The Remote Commander - Sony BKM-201SC Bedienungsanleitung

Using the Remote Commander

When you use the Remote Commander supplied with the PGM-200R1A/200R1E/200R1J/
200R1U
You can directly operate for switching the input signal, still function, and on-screen information with the Remote
Commander instead of using the menu.
1 RGB1/RGB2 buttons
2 LINE button
3 Y/C button
4 ZOOM button
5 STILL button
1 RGB1/RGB2 buttons
Select the signal input from the RGB1 or RGB2
connectors.
2 LINE button
Select the signal input from the VIDEO connector in
the LINE connectors.
3 Y/C button
Select the signal input from the Y/C jack in the LINE
connectors.
4 ZOOM button
Adjust the zoom. Each time you press the ZOOM
button, the picture is magnified by two, three, and four
times respectively.
22 22
(EN)
6 DISPLAY button
MUTING DISPLAY POWER
RGB1 RGB2 YUV
7 YUV button
LINE Y/C
MTS/MPX
1 2 3
4 5 6
7 8 9
10/0 CH
STILL ZOOM DEGAUSS
POWER
SELECT
ON MENU
OFF ENTER
ON
VOL CH
SET
OFF
ID MODE
5 STILL button
Freezes a picture on the monitor screen. Press again to
resume normal screen.
6 DISPLAY button
Displays the on-screen information on the monitor
screen. Press again to clear it.
7 YUV button
Select the component signal input from the RGB1
connectors.
SONY BKM201SC (E,F,G,S,I) 3-859-609-02