Sony BKM-201SC Bedienungsanleitung Seite 11

@ª H SIZE
Adjusts the horizontal picture size. Press + to enlarge
the horizontal size and press – to diminish it.
#º V SIZE
Adjusts the vertical picture size. Press + to enlarge the
vertical size and press – to diminish it.
#¡ H CENTER
Adjusts the horizontal centering. Press + to move the
picture to the right and press – to move it to the left.
#™ V CENTER
Adjusts the vertical centering. Press + to move the
picture up and press – to move it down.
#£ RESET
Select to restore the factory settings in RASTER ADJ
menu items @§ to #™.
Note
There are two ways to change the picture size and
center:
– one is to change the picture area size (H SIZE, V
SIZE) and center (H CENTER, V CENTER)
themselves, which can be done through the RASTER
ADJ menu.
– the other is to change the image size (H WIDTH, V
HEIGHT) and center (H SHIFT, V SHIFT) inside
picture area, which can be done through the PIC
SIZE menu.
TEST SIGNAL menu
This menu is used for using the test signal pattern.
#¢
T E S T S I G N A L
#∞
H A T C H
B O X
#§
C O L O R B A R
#¶
G R A Y S C A L E
O F F
#•
+ – S E L E C T C A N C E L
ENTER
For details on the test signal pattern, see "Using the Test
Pattern" on page 20(EN).
MENU
#¢ HATCH
Displays the following test signal pattern.
#∞ BOX
Displays the following test signal pattern.
#§ COLOR BAR
Displays the following test signal pattern.
#¶ GRAY SCALE
Displays the following test signal pattern.
#• OFF
The test signal pattern goes off from the screen.
Note
The test signal is displayed on the screen and output
from the ACTIVE OUT connectors as the VGA signal
(31.5 kHz/60 Hz) regardless of the types of the input
signals.
SONY BKM-201SC (E,F,G,S,I) 3-859-609-02
11
(EN)