Fibre Channel Cluster Setup - Dell PowerVault MD3000i Bedienungsanleitung

Fibre Channel Cluster Setup

WARNING:
safety information that shipped with your system. For additional best practices
information, see the Dell Regulatory Compliance website at
www.dell.com/regulatory_compliance.
After a Dell™ Managed Services representative completes the setup of your
Fibre Channel cluster, verify the hardware connections and the hardware and
software configurations as described in this section. Figure 2-1 and Figure 2-2
show an overview of the connections required for the cluster and Table 2-1
summarizes the cluster connections.
Before you begin any of the procedures in this section, read the
Fibre Channel Cluster Setup
11