Dell PowerVault MD3000i Bedienungsanleitung Seite 20

Table 4-1. iSCSI Hardware Interconnections
Cluster Component
One PowerEdge
system node
One Dell PowerVault
MD3000i storage
system
One Dell PowerVault
MD1000 storage
expansion enclosure
(optional)
20
iSCSI Cluster Setup for Dell PowerVault MD3000i and MD1000
Connections
• One CAT 5e/6 cable from public NIC to the local area
network (LAN).
• One CAT 5e/6 cable from private Gigabit NIC to Gigabit
Ethernet switch (private network).
• One CAT 5e/6 cable from redundant private Gigabit NIC
to redundant Gigabit Ethernet switch (private network).
NOTE:
For additional information on Dell PowerVault
MD3000i system see your Dell PowerVault MD3000i SetUp
documentation.
• Two CAT 5e/6 cables connected to LAN (one from each
storage processor module) for the management interface.
• Two CAT 5e/6 cables per storage processor for iSCSI
interconnect.
NOTE:
For additional information on Dell PowerVault
MD3000i system see your Dell PowerVault MD3000i Setup
documentation.
Additional SAS cable connections as required for the
MD1000 expansion enclosures.