Installing The Host-Based Software Needed For Storage; Installing Multi-Path Software For Storage; Installing Powerpath ® For Dell/Emc Systems; Installing Multi-Path Driver Software For Md3000/Md3000I - Dell PowerVault MD3000i Bedienungsanleitung

Installing the Host-Based Software Needed
for Storage
If you are installing Dell/EMC Fibre Channel Storage, see the Dell/EMC
documentation that came with your system to install the EMC Naviagent
software.
If you are installing a Dell PowerVault storage, see the Dell PowerVault
documentation that came with your system to install the Modular Disk
Storage Manager Software from the Dell PowerVault Resource CD.
NOTE:
The Microsoft
MD3000i storage system. The Microsoft iSCSI Software Initiator can be
downloaded from www.microsoft.com.

Installing Multi-Path Software for Storage

Follow the documentation accompanying the storage device to install
the appropriate multi-path software.
Installing PowerPath
1 On node 1, install EMC
NOTE:
that came with your Dell/EMC storage system.
2 On completion of the installation procedure, restart your system.
3 Repeat step 1 and step 2 on the remaining nodes.

Installing Multi-Path driver software for MD3000/MD3000i

In the case of a SAS or iSCSI (MD3000/MD3000i storage system)
cluster, the Multi-Path software should already be installed on your hosts
as instructed in the section "Installing the Host-Based Software Needed
for Storage" on page 36.

Installing Multi-Path driver software for EqualLogic iSCSI Storage Array

For more information see "Installing and Configuring Dell EqualLogic Host
Integration Tool (HIT) Kit" on page 39.
36
Configuring Network and Storage for Oracle RAC Database
®
iSCSI Software Initiator is required for a Dell PowerVault
®
for Dell/EMC Systems.
®
PowerPath
For more information, see the EMC PowerPath documentation
®
.