Preparing The Database Disk And Flash Recovery Area For Database Storage With Asm - Dell PowerVault MD3000i Bedienungsanleitung

1 On node 1, create one logical drive for the Database.
Locate the disk that is assigned for the Oracle Database.
a
On the disk partition area, right-click the free space and select
b
New Logical Drive.
The Welcome to the New Partition wizard is displayed.
Click Next.
c
In the Select Partition Type window, select Logical drive and click
d
Next.
In the Specify Partition Size window in the Partition size in MB field,
e
type the appropriate size and click Next.
In the Assign Drive Letter or Path window, select Do not assign a
f
drive letter or drive path and click Next.
In the Format Partition window, select Do not format this partition
g
and click Next.
Click Finish.
h
2 On node 1, create one logical drive for the Flash Recovery Area.
Locate the disk that is assigned for the Flash Recovery Area.
a
Perform step b to step h in step 1.
b
3 Restart all other nodes and login as administrator.
Preparing the Database Disk and Flash Recovery Area for Database
Storage With ASM
This section provides information about creating logical drives that will be
used to create ASM disk storage. ASM disk storage consists of one or more
disk groups that can span multiple disks.
NOTE:
If you are creating the logical drives that are used to create the OCFS
storage disk, ignore the following steps and follow the procedures in "Preparing
the Database Disk and Flash Recovery Area for Database Storage With OCFS"
on page 46.
Configuring Network and Storage for Oracle RAC Database
47