Preparing The Ocr And Voting Disks For Clusterware On Windows 2003 - Dell PowerVault MD3000i Bedienungsanleitung

Preparing the OCR and Voting Disks for Clusterware on Windows 2003

1 On the Windows desktop, right-click My Computer and select Manage.
2 Expand Storage and click Disk Management.
The storage disk that you initialized in the "Verifying Multi-Path Driver
Functionality" on page 37 is displayed as Unallocated.
3 Right-click the partition area of the first shared disks assigned to the
cluster nodes and select New Partition.
The Welcome to the New Partition wizard is displayed.
4 Click Next.
5 On the Select Partition Type window, select Extended partition and click
Next.
6 On the Specify Partition Size window, accept the default partition size
and click Next.
7 Click Finish.
The disk partition area you selected in step 3 is configured as an extended
partition.
8 Repeat step 3 to step 7 on all shared disks that are assigned to the cluster
nodes.
9 Create a logical drive for the OCR disk.
On the partition area of the disk identified for OCR and voting disk
a
(2 GB LUN/virtual disk), right-click the free space and select
New Logical Drive.
The Welcome to the New Partition wizard is displayed.
Click Next.
b
On the Select Partition Type window, select Logical drive and
c
click Next.
On the Specify Partition Size window, type 120 in the Partition size
d
in MB field and click Next.
On the Assign Drive Letter or Path window, select Do not assign
e
a drive letter or drive path and click Next.
On the Format Partition window, select Do not format this partition
f
and click Next.
44
Configuring Network and Storage for Oracle RAC Database