Dell PowerVault MD3000i Bedienungsanleitung Seite 22

4 Connect one CAT 5e/6 cable from the other port (iSCSI HBA or NIC)
of node 2 to the In-1 port of RAID controller 1 in the
MD3000i storage enclosure.
5 Connect two SAS cables from the two MD3000 out ports to the two In
ports of the first
6 Connect two SAS cables from the two MD1000 out ports to the In-0 ports
of the second
NOTE:
For information on configuring the PowerVault MD1000 expansion
enclosure, see the Dell PowerVault MD3000 Storage System documentation
available on the Dell Support website at support.dell.com.
Switched iSCSI clusters can support up to eight nodes.
Figure 4-2. Cabling iSCSI Switched Clusters
corporate, public
or private network
22
iSCSI Cluster Setup for Dell PowerVault MD3000i and MD1000
Dell PowerVault
MD1000 expansion enclosure (Optional).
Dell PowerVault
MD1000 expansion enclosure (Optional).
Dell PowerVault
up to 16 standalone host
servers
IP SAN (dual Gigabit
Ethernet switches)
Ethernet management
port (2)
MD3000i RAID Enclosure
(dual controller)
CAT 5e/6 Gigabit NIC for management
CAT 5e/6 Gigabit NIC iSCSI ports