Silvercrest SSRA1 Bedienungs- Und Sicherheitshinweise Seite 43

Choose a WI-FI network with a strong signal
from your smartphone settings to connect your
product. Verify your WI-FI network allows de-
vices.
Switch the power switch
vacuum cleaner to "-".
Hold the "Spot mode / Decrease time" button
on the robot vacuum cleaner approx. 5 seconds
until you hear a beep.
The robot vacuum cleaner will switch to WI-FI
setup mode and the network indicator will blink.
In the "Robot" menu click "Add new robot" or
to add the robot vacuum cleaner.
Select robot model "SSRA1".
Enter your WI-FI password and click "Connect-
ing" to connect to the WI-FI network. The robot
vacuum cleaner should connect to the WI-FI
network after a short time.
Note: If unable to connect to WI-FI, restart the ro-
bot vacuum cleaner and try to connect again. You
can alternatively use option 2 to connect.
on the robot
10
16
Option 2
Hold the "Spot mode / Decrease time" button
on the robot vacuum cleaner for approx. 8
seconds until you hear two beeps.
In the "Robot" menu click "Add new robot" or
to add the robot vacuum cleaner.
Select robot model "SSRA1".
Click "Can't connect? Click here" to use the
network configuration.
Android:
In the "Choose robot hotspot" menu click "Please
choose" and select the hotspot "Robot-XXXX"
from the pop-up list.
In the "Choose WI-FI" menu, click "Please
choose". Select your WI-FI network and enter
the password.
Operation via app
16
GB/IE 43