Disconnecting; Cleaning Via App - Silvercrest SSRA1 Bedienungs- Und Sicherheitshinweise

on the robot vacuum cleaner and it will auto-
matically reconnect to the same WI-FI network.

Disconnecting

Disconnecting through the administrator
In the "Robot" menu, select your robot and
swipe left.
Click "Disconnect".
Disconnecting through the robot vacuum
cleaner
Switch on the robot vacuum cleaner and wait
about 30 seconds to determine if the robot
vacuum cleaner connects to the WI-FI network.
If the robot vacuum cleaner is connected to the
network it will remind you with a beep and the
WI-FI indicator on the robot vacuum cleaner
will switch from blinking to steady.
Whilst connected to WI-FI, hold the "Spot
mode / Decrease time" button
vacuum cleaner for approx. 8 seconds until it
beeps twice. The robot vacuum cleaner has
been disconnected from all users. The con-
sumer can then restart the robot vacuum
cleaner and connect to it.
Auto mode
on the robot
16
Operation via app

Cleaning via app

Select your robot from the "Robot" menu.
Click to switch to the "Settings" menu.
Select "Auto mode" for the robot to enter this
mode the next time it is started via the app.
GB/IE 45