Negative Air - Marzocchi BOMBER serie Betriebs- Und Wartungsanleitung

Adjustments
58
Right leg positive air adjustment
• Unscrew and remove the dust cap (A).
• Fully tighten the pump adapter on the outside
valve (B).
• Inflate air up to the required pressure.
• Fully tighten the dust cap (A).
5.2

Negative air

To inflate your fork, use only the special
MARZOCCHI pump with pressure gauge,
which you can buy at the authorized centers.
Use of improper tools might lead to improper
inflating and cause improper function or
damage to the fork itself.
By pressurizing air through the valve, you can
adjust the damping of the forces generated
during the REBOUND phase.
If you increase the pressure inside the fork's leg,
you increase the rebound damping.
To do so, you need to:
• Unscrew and remove the dust cap (A).
• Fully tighten the pump adapter on the valve,
that is located in the central position.
• Inflate air up to the required pressure.
• Fully tighten the dust cap (A).
B
C
A