Wheel Installing With A Shiver Fork - Marzocchi BOMBER serie Betriebs- Und Wartungsanleitung

3.6 Wheel installing with a Shiver
fork
For correct fork function, please follow the
instructions here below when installing the
wheel:
• Insert the wheel axle (A) through the right
wheel axle clamp, the wheel and the left
wheel axle clamp.
• Screw down the bolt (B) on the left side and
tighten to the required torque (see Table 1 –
Tightening Torques).
• Fully compress the fork a few times to
properly align the fork legs.
• Tighten to the required torque (see Table 1 –
Tightening Torques) the bolts (C) positioned
on both dropouts.
A
B
C
Installation
51
6 mm
5 mm