Fronius Primo serie Serviceanleitung, Ersatzteilliste Seite 127

(1)
(2)
Replace the left external fan:
(1)
(2)
(3)(4) (5)
Carefully turn the inverter round
14
Reconnect the Molex plug (2)
15
Insert the cable into the clamping nose
16
Disconnect the Molex plug (1)
1
Release the cable from the clamping
2
nose and feed it out
Carefully turn the inverter round so that
3
the rear is accessible
Remove 2 x 5x14 mm TX25 screws (3)
4
Loosen the locking device (4) of the fan
5
holder (5) and open the holder
(4) (3)
127