Herunterladen Inhalt Inhalt Diese Seite drucken

Connect A Tv To An Audio Input - Yamaha DVX-S200 Bedienungsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Notes on the audio jacks
Notes on recording and playing video
Connect a game console to a digital input

Connect a TV to an audio input

OUTPUT
VIDEO
L
AUDIO
R
VIDEO
L
R
IN
IN
OUT
VIDEO 1
VCR
TV
Use a commercially available audio cable.
CinemaStation
IN
VIDEO 2
• You cannot simultaneously use both IN and OUT jacks when
the jack names are the same as each other. For example, the
signal input from the VCR IN jack does not output from the
VCR OUT jack.
• CinemaStation's digital and analog signal circuits are
independent of each other, so analog input signals can only
output from analog output jacks and digital input signals can
only output from digital output jacks.
• Perform a test recording before recording.
• Do not press ON SCREEN during recording a DVD video.
If you press ON SCREEN, the On Screen Menu appears,
and both the video and On Screen Menu will be recorded.
• It is not possible to record DSP effects.
• When you turn off the connected VCR power, playback sound
may become distorted and the volume reduced. In this case,
turn on the VCR power.
• Even if you adjust the audio volume, audio quality, or change
the DSP Program during a video recording, it has no effect on
the recorded sound.
• Video recordings that you make cannot be used for any
purpose other than private enjoyment without the consent of
the copyright holder.
• You cannot record from a copy protected DVD disc.
If your game console has a digital output jack (optical), it can be
connected to CinemaStation's OPTICAL IN jack.
See page 50, "Connecting Audio Equipment" to learn how
to connect an optical jack.
Connect the video output to CinemaStation's VIDEO 1 IN or
VIDEO 2 IN jack. ("VIDEO" IN jack on U.K. and Europe
models)
Enjoy TV sound with CinemaStation by connecting the TV
audio output jack to the audio IN jacks of VIDEO 1 or VIDEO 2
("VIDEO" IN jack on U.K. and Europe models). Press VIDEO 1
or VIDEO 2 on the Remote Control to input TV sound.
Note
• Press VIDEO for U.K. and Europe models.
Using Other Equipment
47

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis