Disposal And Recycling; Troubleshooting - Scheppach HS80 Originalbetriebsanleitung

AC motor
• The mains voltage must be 230-240 V~
• Extension cables up to 25 m long must have a
cross-section of 1.5 mm .
2
Connections and repairs of electrical equipment may
only be carried out by an electrician.
Please provide the following information in the event
of any enquiries:
• Type of current for the motor
• Machine data - type plate

15. Disposal and recycling

The equipment is supplied in packaging to prevent
it from being damaged in transit. The raw materials
in this packaging can be reused or recycled. Never
place batteries in your household refuse, in fire or in
water. Batteries should be collected, recycled or dis-
posed of by environment-friendly means. The equip-
ment and its accessories are made of various types
of material, such as metal and plastic. Defective com-
ponents must be disposed of as special waste. Ask
your dealer or your local council.

16. Troubleshooting

Trouble Possible cause
1. Saw blade Fastening nut is not suf-
comes lose when ficiently tightened
turning off the
engine
2. Engine cannot a) Breakdown of the main's
be started fuse
b) Defective extension
cable
c) Defective motor or
switch connection
d) Defective engine or
switch
3. Wrong direction a) Defective capacitor
of rotation
b) Incorrect connection
4. Engine does a) Cross-section of the ex-
not provide power, tension cable insufficient
fuse is tripped
b) Overload caused by a
blunt saw blade
5. Burn areas on a) Blunt saw blade
the cut surface
b) Incorrect saw blade
Old devices must not be disposed of with house-
hold waste!
This symbol indicates that this product must
not be disposed of together with domestic
waste in compliance with the Directive
(2012/19/EU) pertaining to waste electrical and
electronic equipment (WEEE). This product must be
disposed of at a designated collection point. This can
occur, for example, by handing it in at an authorised
collecting point for the recycling of waste electrical
and electronic equipment. Improper handling of
waste equipment may have negative consequences
for the environment and human health due to poten-
tially hazardous substances that are often contained
in electrical and electronic equipment. By properly
disposing of this product, you are also contributing
to the effective use of natural resources. You can
obtain information on collection points for waste
equipment from your municipal administration, pub-
lic waste disposal authority, an authorised body for
the disposal of waste electrical and electronic equip-
ment or your waste disposal company.
Solution
Tighten fastening nut (right-hand
thread)
a) Check main's fuse
b) Replace extension cable
c) Have the device checked by a
qualified electrician
d) Have the device checked by a
qualified electrician
a) Have the device checked by a
qualified electrician
b) Have the polarity of the wall
socket replaced by qualified
electrician
a) see Electrical connection
b) Replace the saw blade
a) Sharpen or replace the saw
blade
b) Replace the saw blade
GB І 31 31