Carrier WTC-RCI-D Installationsanweisungen Seite 6

Depending on prior configuration and the
type of blinds present in your room, you
may be able to adjust the position of blinds
as well as control the tilt mechanism.
To adjust the blinds
Press the Menu button
■
until the Blinds screen appears.
Press the Up button
■
button
to select the blinds group
number.
BLINDS POSITION
Once the blinds group is selected, press
■
to access the blinds position
command.
Press or to set the blinds position.
■
UP: Raise blinds.
STOP: Stop blinds raising/lowering.
DOWN: Lower blinds.
STOP: Stop blinds raising/lowering.
6
Blinds Control
Example:
Selecting one zone (zone number displayed).
repeatedly
Selecting all zones (ALL means that all blinds
or the Down
groups will be managed at the same time).
TILTING
■
■
■
Order No.: 10071, 10.2016 - Supersedes order No.: 10071, 04.2015.
Blinds group
No. 1 controlled
All blinds groups
controlled
Press to access the tilting command.
Press or to set the blinds rotation.
UP: Rotation UP.
STOP: Rotation stopped.
DOWN: Rotation DOWN.
STOP: Rotation stopped.
When the blinds rotation is set, press
to go to the next screen or wait 10 seconds
to go back to the default screen.