Tt3 Set Up - Clearaudio TT3 Bedienungsanleitung

User manual / Bedienungsanleitung
TT3
3. set up
Pic. 9: Fixing the height adjustment
Pic. 10: Remove the height adjustment screw
Pic. 11: Mounting the tonearm
Pic. 12: Secure the tonearm
Made in Germany
Please remove the foam used for safe transportation
of the tonearm carriage.
Turn the height adjustment screw in (clockwise,
when viewed from above) as far as possible.
Remove the height adjustment screw by loosening
with 2.5mm hex wrench (Pic. 10).
Now open the tilt-base so that the rods are
horizontal and place the tonearm on the support
bars until the nut of the adjustment height screw
becomes visible in the height adjustment screw
hole (Pic. 11).
Secure this setting by re-inserting the height
adjustment screw and tightening it by hand
(Pic. 12).
9