Special Instruction - Clearaudio TT3 Bedienungsanleitung

User manual / Bedienungsanleitung
8. Special instructions
8.1 Maintenance
• Please make sure that the precision dry ball bearings are not touched, cleaned or lubricated in
any way.
• Never move or readjust the screws in the tonearm carriage.They should be adjusted only by
qualified dealers or at the Clearaudio factory.
• Use a cotton bud and a commercially available glass cleaner to clean the glass tube. Put some
glass cleaner on the cotton bud and slide it through the glass tube with a movement from the
inlet to the outlet groove.
8.2 Transportation
Should further transportation of the
packing material. Otherwise serious damage could occur.
During any transportation of the tonearm, always protect the carriage with a piece of
foam so that the carriage cannot move during transportation.
When repackaging the turntable, please follow in reverse the steps indicated in this
manual for installation and setup.
8.3 Service
If any servicing or repair of a Clearaudio product is necessary, please first contact your dealer or
distributor. Alternatively contact Clearaudio directly and we will advise you of your nearest service
location.
PLEASE RETAIN ALL ORIGINAL PACKAGING. You will need it if this product has to be transported
and/or shipped. Any further questions you may have about this product should be directed to your
local dealer or direct to Clearaudio.
16
TT3
tonearm be necessary, please always use the original
© clearaudio electronic GmbH, 2019-04