Installation And Set Up - Clearaudio EMOTION SE Bedienungsanleitung

Emotion SE
User manual / Bedienungsanleitung

3. Installation and set up

Emotion SE
The set up and installation of the is done quickly and very easy.
Please use the white gloves during this procedure, to avoid scratches.
1.)
You should consider a safe and clean working area for the installation, as near as possible to
Emotion SE
the final position of the -turntable.
First take out the motor and tonearm of the packing. Now you should take out the first
Emotion SE
packing layer. After that you can take out the - turntable chassis from the next
packing layer. Place the turntable body on a clean underlay.
To avoid any damages to your bearing, the turntable platter should achieve room
temperature before the set up begin (approx. 20 ° Celsius).
2.)
Take the upper bearing part and place it on the lower bearing part, which is already
integrated in the chassis (picture 2).
3.)
Place the platter with both hands carefully onto the bearing.
Through a lightly (!!) up and down movement the platter will slip onto the bearing upper
part (picture 3).
Avoid major side force to prevent any damages to the ceramic bearing!
Pic. 2: Placing the bearing
Pic. 3: Placing the platter
Make sure with gentle pressure that the platter is applying on the complete surface of the
bearing.
Page / Seite 6  Clearaudio electronic GmbH 2013