AirSep VisionAire 2 Gebrauchsanweisung Seite 135

VisionAire™ 2 and VisionAire™ 3
Ø
Top and Side Handles:
o
Ø
On/Off (I/0) Power Switch:
o
Ø
Oxygen Outlet
o
Ø
Circuit Breaker Reset Button:
o
Ø
Flowmeter Adjustment Knob:
o
Ø
Low Oxygen Concentration Indicator (optional – mandated for EU
and specific countries)
o
Ø
Hour Meter:
o
Ø
Operating Instructions Label:
o
Ø
Casters:
o
Ø
Specification Label:
o
®
AirSep Corporation
MN157-1 rev. B
Enables convenience in carrying the unit.
Starts and stops the operation of the unit.
Provides connection for a humidifier (if required) or cannula.
Resets the unit after electrical overload shutdown
Controls the oxygen flow rate in liters per minute (LPM).
When equipped with an Oxygen Monitor – a warning LED
(amber) is activated on the front panel (see Section 2.6 ' Safety
Features' for details)
Records the concentrator's cumulative hours of operation.
Directs usage of the unit.
Four casters enable unit to be easily moved, as needed.
Displays electrical specifications and serial number.
EN
EN-9