Gas, Dust, Steam, Smoke; Oils, Greases And Other Chemical Substances - Eisemann BSKA 14 EV RSS cube Betriebsanleitung

H Use only certified and approved cables for the mains system!
Immediately turn off the power generator in the event of faults in its electrical supply!
H
Only a qualified electrician is allowed to work on electrical systems and equipment in accordan-
H
ce with the electrotechnical rules!
Check the electrical equipment of the power generator regularly. Immediately repair any de-
H
fects such as loose connections or damaged cables or plant components!
Use only genuine fuses with the specified current!
H
De-energize machine components undergoing inspection, maintenance and repair work. Make
H
sure the disconnected areas are de-energized!
Block off the work area!
H
Use only voltage-insulated tools!
H
1.2.2.

Gas, dust, steam, smoke

Welding, burning, and grinding on the power generator is only permitted when this work is
I
expressly approved by EISMANN. There is a risk of fire and explosion!
Before starting any welding, burning, and grinding, clear off any dust and combustible materi-
I
als from the power generator and its surroundings! Ensure adequate ventilation (risk of explosi-
on)!
Comply with any existing local rules when working in tight spaces!
I
Use the specified personal protective equipment!
I
1.2.3. Noise
I The noise control equipment on the power generator must be in its protective position during
operation!
I Use the specified personal protective equipment!
1.2.4.

Oils, greases and other chemical substances

When handling oils, grease, and other chemical substances follow the safety regulations for
I
each product!
Be careful when handling hot operating equipment and auxiliary materials. There is a risk of
I
getting burned or scalded!
Use the specified personal protective equipment!
I
1.2.5. Hot parts
Never touch any hot parts, such as the exhaust system, engine parts or the like. Danger of
I
burns!
Use the specified personal protective equipment!
I
Page 6