Switching Off; Cleaning; Service - Parkside IAN 33000 Bedienungs- Und Sicherheitshinweise

Operation / Cleaning / Service

Switching off:

j
Release the trigger
j
After you finish work, disconnect the device from the compressed
air source.
nOTe: First disconnect the hose from the compressed
air source and only then disconnect the compressed
air supply hose from the device. This will ensure that the
compressed air supply hose does not wave around in an uncon-
trolled manner.

Cleaning

Q
J
DAnger OF InJUrY! Always disconnect the device from the
compressed air source before you clean or maintain it.
j
Clean the air sandblasting gun
after you finish working. Blow out the air sandblasting gun
the blast medium container
j
Store the air sandblasting gun

Service

Q
J
WArnIng!
paired only by qualified specialist personnel using
original manufacturer parts only. This will ensure that your
air sandblasting gun remains safe to use.
12 GB/IE/CY
to stop operating the air sandblasting gun
2
and blast medium container
1
with compressed air.
4
in a dry, enclosed room.
1
Have your air sandblasting gun re-
.
1
4
and
1