Safety Advice / Operation; Operation; Connecting The Compressed Air Source - Parkside IAN 33000 Bedienungs- Und Sicherheitshinweise

Safety advice / Operation

J
never use oxygen or other combustible gas as the
energy source.
J
never exceed the maximum working air pressure of
8 bar.
J
DAnger OF InJUrY! Disconnect the device from the compressed
air source before carrying out any repairs or maintenance of the
device or moving it to another location.
J
DAnger OF InJUrY! Disconnect the device from the compressed
air source before filling it with blast medium.
J
Use only materials for the blast medium that are suit-
able for the air sandblasting gun. Do not use quartz
sand. There is the danger of toxic silicon dust forming.
J
Take precautions to ensure that other people are not
contaminated (dust generation).
J
ensure that the spent blast medium is trapped and
collected so that it can be disposed of in an environ-
mentally compatible manner.

Operation

Q

Connecting the compressed air source

Q
nOTe: Operate the air sandblasting gun
densate- and oil-free compressed air and never exceed the maximum
working air pressure at the device of 8 bar.
nOTe: The compressed air source must be fitted with a (filter) / pres-
sure reducer so that the air pressure can be regulated.
j
Connect the air sandblasting gun to a suitable compressed air
source by connecting the quick-release coupling of the air supply
hose with the plug-in nipple
locks itself in place automatically.
10 GB/IE/CY
only with cleaned, con-
1
to the air sandblasting gun
3
. It
1