Standby / Reactivation Of The Control Electronics; Plugging The Openings; Li Ing The Cover - SOMFY FREEVIA LINE Montage- Und Gebrauchsanleitung

Commissioning and standard use
2

2.3 Standby / reactivation of the control electronics

Once the self-learning process has been
completed, the electronics automatically switch
to standby a er 5 minutes of inactivity to save
energy.
In standby mode, all indicator lights are
switched off.

2.4 Plugging the openings

You are strongly advised to plug all the openings
to avoid short circuits caused by insects.

2.5 Li ing the cover

16
EN - FREEVIA LINE installation and operating guide - SOMFY
2
1
To check if the motor is switched on or to check/
modify the parameter setting, press the
for 2 seconds to reactivate the electronics.
Once all the cables have been fed through, plug the
openings (oblong holes, cable feed openings) using
silicone.
1. Place the cover on the motor bracket (base).
2. Insert the seal to ensure the motor and
cover screw are watertight.
3. Fasten the cover.
button