Selecting The Light Colour; Dimming - LIVARNO LUX ZD012C100130EU Bedienungs- Und Sicherheitshinweise

T o turn off the product, press the ON / OFF button
base again.
6
The next time the product is switched on, the last selected colour
and brightness level are automatically applied.

Selecting the light colour

Y ou can set the colour of the light in five stages from warm-white
3000 K to cold-white 6500 K.
T ouch the light colour selection button
the product on, it will automatically be set to the last light colour to
have been used.

Dimming

T he product has seven dimmer settings. To dim the light, simply
touch the light level selection button
S elect the small sun at the left end of the bar with your finger to se-
lect low / dimmed light. For high / bright light, touch the large sun
at the right end of the bar. The five different length lines in the bar
represent the various brightness.
Y ou may also run your finger along the lines. Simply stop when
you reach the desired brightness.
Light
Level
1
(Min.)
24 GB/IE
2 3 4
3
for this. When you turn
4
on the lamp base
5
5 6
on the lamp
.
6
7
(Max.)