Operation; The Display; Receiving Calls - switel D7210 Bedienungsanleitung

4

Operation

4.1

The display

Full
You are making a call.
A new phone number has been stored in the caller list CLID or you are
currently in the caller list.
The ring tone is switched off.
The microphone is switched off.
X
Appears when the handset is within range of the base station.
The room monitoring is activated.
You are in programming mode.
The keypad lock is activated.
The handsfree facility is switched on.
You are in the phone book.
4.2

Receiving calls

When an external call arrives, the ringing tone sounds on the handset and the base
station. Lift the handset from the base station or press the call button
and the connection will be made. To end the call, replace the handset in the base
station or press the call button
Important note: If it is not possible to accept a call, the
appear in the display. In this way, you will be able to tell that you have
received a call during your absence. Press the
symbol will go off. If your phone line has the caller display feature (CLID),
then you will have further options. For more information see Chapter 6.
- Operation -
=> =>
on the handset.
=> Discharged.
on the handset
symbol will
?
e button and the
121