Herunterladen Inhalt Inhalt Diese Seite drucken

Operation; The Display; Receiving Calls - switel D6025 Bedienungsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

4

Operation

4.1

The display

In the normal operating mode, the display shows the name of the handset. The pre-set name can be changed at any
time. For more information, refer to 7.7. In addition, the main functions are shown in the display by means of various
symbols.
Lit: You are making a call.
Lit: You are making an external call.
Flashing: You are receiving an external call.
Lit: You are making an internal call.
Flashing: You are receiving an internal call.
Lit: You are in the caller list (CLID).
Flashing: There are new calls stored in the caller list (CLID).
Lit: This number in the caller list is a missing call.
Lit: This number in the caller list was already taken.
Flashing: Please charge the handset.
Lit: Indication of battery capacity
Cycling through of the segments: The handset is being charged.
Lit: When the phone book is being used.
Lit: Whenever programming is activated.
Lit: The keypad lock is activated.
Lit: The connection to the base station is satisfactory.
Flashing: Base station out of range.
Lit: The number is longer than 12 digits.
4.2

Receiving calls

When a call arrives, the ringing tone sounds on the handset and on the base station. The handset will ring a little later
than the base station due to the radio transmission. The message EXT. will flash in the display. Press the call button
on the handset and the connection will be made. The call indicator on the base station will flash during the call.
Note: While the handset is ringing, you can adjust the ringer volume by means of the
To end the call, replace the handset in the base station or press the call button
Notes: Please refer to Chapter 6 for information on how to show the caller's number in the display.
When the automatic call accept feature is selected, the call is automatically accepted as soon as you lift the handset
from the base station. You can find out in Chapter 7.57.5 how to switch the automatic call accept feature on or off.
- Operation -
and
buttons.
on the handset.
67

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis