Setting The Remote Control Code - Yamaha RX-N600 Bedienungsanleitung

REMOTE CONTROL FEATURES

Setting the remote control code

You can control your TV and other components by setting
the appropriate remote control code for each input source.
For a complete list of available remote control codes, refer
to "LIST OF REMOTE CONTROL CODES" at the end of
this manual.
The following table shows the default component in the
"Library (component category)" column and the remote
control code for each input source.
Remote Control Code Default Settings
Library
Input
(component
source
category)
CD CD
MD/CD-R MD
DVD DVD
DTV/
–
CBL
TUNER TUNER
OTHER AUDIO
V-AUX/
ACCESSORIES
DOCK
(iPod)
DVR DVR
OTHER AUDIO
NET/
ACCESSORIES
USB
(NET/USB)
–
Blank
TAPE
button
Note
You may not be able to operate your YAMAHA component even
if a YAMAHA remote control code is initially set as listed above.
In this case, try setting other YAMAHA remote control codes.
y
The blank button is the one on the right of MD/CD-R.
86
En
Default
Manufacturer
code
YAMAHA 61907
YAMAHA 70888
YAMAHA 40539
– –
YAMAHA 81916
YAMAHA 81981
YAMAHA 51544
YAMAHA 81982
– –
YAMAHA 70524
1
Press one of the input selector buttons,
or the blank button on the right of MD/CD-R
to select the component you want to set up.
CD
DVD
DOCK
V-AUX
2
Press CODE SET using a ballpoint pen or a
similar object.
The TRANSMIT indicator on the remote control
flashes twice.
CODE SET
3
Press the numeric buttons (0 to 9) to enter
the five-digit remote control code for the
component to be used.
The TRANSMIT indicator on the remote control
flashes twice, and the remote control code for the
selected component is set.
STEREO MUSIC ENTERTAIN
1 2 3
STANDARD SELECT EXTD SUR.
5 6 7
SPEAKERS ENHANCER
NIGHT STRAIGHT
9 0 10
y
To clear the remote control code previously set for the selected
component, enter the code number "9980".
Notes
• If the manufacturer of your component has more than one code,
try each of them until you find the correct one.
• If you do not press any buttons within 30 seconds in step 3, the
setup process is canceled. If this happens, repeat the setup
procedure.
MD SLEEP
CD-R
CBL MULTI CH IN
DTV TUNER
USB
DVR
NET
TRANSMIT
Flashes
MOVIE
4
TRANSMIT
DIRECT ST.
8
Flashes
ENT.
EFFECT