Herunterladen Inhalt Inhalt Diese Seite drucken

Yamaha RX-N600 Bedienungsanleitung Seite 108

Av receiver
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 230
TROUBLESHOOTING
Status message
Please wait
Please wait
(Starting Server)
Connect error
Disconnected
Access error
Unable to play
List updated
Bookmark ON
Bookmark OFF
106
En
Cause
This unit is in the middle of recognizing
the connection with your network.
This unit is in the middle of recognizing
the connection with your USB memory
device or USB portable audio player.
This unit is in the middle of waking up
MCX-2000 that has been set to the
standby mode.
There is a problem with the signal path
from your network to this unit.
Your USB memory device or USB
portable audio player has been
disconnected from the USB port of this
unit.
The PC server or MCX-2000 previously
connected to this unit no longer exists.
There is a problem with the signal path
from your USB memory device or USB
portable audio player to this unit.
This unit cannot access your USB
memory device or USB portable audio
player.
There is a problem with the signal path
from your USB memory device or USB
portable audio player to this unit.
This unit cannot play back the songs
currently stored on your PC.
The network may be overloaded with
heavy traffic, and playback is interrupted.
The list of the contents stored on your PC
server or MCX-2000 has been updated.
The desired Internet radio station has
been added to the "Bookmarks" list.
The stored Internet radio station has been
removed from the "Bookmarks" list.
Remedy
This is not a system malfunction. Wait for a
while.
This is not a system malfunction. Wait for a
while.
Wait for approximately 20 seconds.
Check the connection between this unit and the
LAN port on your router or hub.
Make sure your router is properly connected and
turned on. Also, make sure your modem is
properly connected and turned on when you are
attempting to listen to Internet radio.
Check the connection between this unit and your
USB memory device or USB portable audio
player.
Connect this unit to the available PC server or
MCX-2000.
Turn off this unit and reconnect your USB
memory device or USB portable audio player to
the USB port of this unit.
Try resetting your USB memory device or USB
portable audio player.
Try another USB memory device or USB portable
audio player.
Turn off this unit and reconnect your USB
memory device or USB portable audio player to
the USB port of this unit.
Try resetting your USB memory device or USB
portable audio player.
Make sure Windows Media Connect 2.0 is
installed on your PC.
Check that the songs currently stored on your PC
are playable (MP3, WMA, and WAV).
Store some other playable music files (MP3,
WMA, and WAV) on your PC.
Try preparing a network exclusively for use with
this unit to separate it from general network
traffic.
See
page
23
23
96
28
28

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis