Input Mode; Input Rename - Yamaha RX-N600 Bedienungsanleitung

Input mode

B)INPUT MODE
Use this feature to set this unit to reset "INPUT MODE"
back to "AUTO" (see page 35) regardless of the previous
setting or to recall the last input mode ("AUTO", "DTS",
or "ANALOG") used for that source whenever you turn on
this unit.
Choices: AUTO, LAST
B)INPUT MODE
>AUTO
[<]/[>]:Select
[ENTER]:Return
• Select "AUTO" to reset "INPUT MODE" back to
"AUTO" (see page 35) regardless of the previous
setting whenever you turn on this unit. This unit
automatically selects input signals in the following
order:
(1) Digital signals
(2) Analog signals
• Select "LAST" to set this unit to automatically recall
the last input mode ("AUTO", "DTS", or "ANALOG")
used for that source whenever you turn on this unit.

Input rename

C)INPUT RENAME
Use this feature to change the name of the input source
that appears in the OSD and in the front panel display.
C)INPUT RENAME
DVD ->
[<]/[>]:Position
[ ]/[ ]:Chara.
1
Press one of the input selector buttons on
the remote control to select the input source
you want to change the name of.
MD
CD CD-R
CBL
DVD DTV
DOCK
V-AUX DVR
LAST
DVD
SLEEP
MULTI CH IN
TUNER
USB
NET
2
Press j / i on the remote control to place the
"_" (underscore) under the space or the
character you want to edit.
PRESET/CH
3
Press u / d to select the character you want
to use and then press j / i to move to the
next space.
PRESET/CH
ENTER
A/B/C/D/E
Notes
• You can use up to 8 characters for each input.
• Press d to change the character in the following order, or
press u to go in the reverse order:
A to Z, a space, 0 to 9, a space, a to z, a space, symbols (#,
*, +, –, etc.)
4
Repeat steps 1 through 3 to rename each
input source.
5
Press ENTER on the remote control to exit
from "INPUT RENAME".
PRESET/CH
SET MENU
ENTER
A/B/C/D/E
PRESET/CH
ENTER
A/B/C/D/E
ENTER
A/B/C/D/E
75
En