Lamp Replacement - Beko HNU51311SH Bedienungsanleitung

3 Installation and Use of the Appliance
3.4.2 Use of the Digital Switch
A B
1 2
A- 1. Level Button
B- 2. Level Button
C- Digital Display
D- 3. Level Button
E- Lamp On/Off Button
(A) Button: The hood operates in 1st speed level
by pressing this button. (Displayed on the screen)
The screen and hood turn off when you press this
button again to switch off the appliance.
(B) Button: The hood operates in 2nd speed level
by pressing this button. (Displayed on the screen)
The screen and hood turn off when you press this
button again to switch off the appliance.
(E) Button: The hood operates in 3rd speed level
by pressing this button. (Displayed on the screen)
The screen and hood turn off when you press this
button again to switch off the appliance.
(C) Digital Display: It shows the selected speed and
warning symbols.
(D) Lamp On/Off button: You can illuminate the
cooking area by pressing this button.
Cleaning Periods for Metal Filters: Filters should be
cleaned when "C" symbol is shown on the display
(every 60 hours) or every four weeks (according to
use). Press and hold down the button A for more
than 3 seconds (while the appliance is off) to dele-
te the "C) symbol after cleaning and installing the
filters. The letter E will be shown on the display
and it will switch to normal operation. If you want
to operate the appliance without deleting the C
signal, the active speed will be shown for 1 second
when you press any of the level buttons and the
Hood / User Manual
C
D E
3 4 5
motor will continue to operate in the selected le-
vel after the C signal is shown again.
Automatic Stop 15 mins.: The appliance has an
automatic stop feature to eliminate the odour,
to discharge the steam after cooking is complete,
and to have the appliance stopped automatically
while ventilating the environment for a while.
To activate the automatic stop feature, press the
same button (A, B, D) according to the current
speed level for 3 seconds. At the end of operati-
on for 15 minutes, all operating functions of your
appliance will stop.
Automatic stop feature will be deactivated and
the motor of the appliance will stop when you
press the same button corresponding to the spe-
ed level while the automatic stop feature is active.
This feature will be deactivated when you switch
to different speed levels. If you want the applian-
ce to stop automatically, you need to reactivate
the automatic stop function of the appliance.

3.5 Lamp Replacement

3.5.1 Candle Bulb Replacement
WARNING
A
Cut the power supply of the hood.
Lamps may burn your hands while
hot, so wait for them to cool down.
Pic. 11: Candle Bulb Replacement
• Remove the aluminum cartridge filter. Remove
the faulty lamp and replace it with the one
having the same value. Pic. 11
13 / EN